PolyBasic160 LF
GET QUOTE
GENERAL
| Welding range 40 to 160mm: 40 to 63mm – SDR7.4 to SDR 11. 75mm to 90mm – SDR 9 to SDR 17. 110mm to 160mm to SDR 11 |
| Complete and ready to weld. |
| Genuine 12 months international warranty. |
| Main frame includes light weight alloy main clamps of 160mm diameter. |
| Layer clamps 160×140, 140×125, 125×110, 110×90, 90×75, 75×63, 63×50 & 50x40mm. |
| Removable cast Aluminum PTFE coated heating plate with electronic temperature control. |
| Removable cast Aluminum electrically operated facing tool. |
| Stand for heating plate and facing tool. |
| Manual opening of frame. Optional torque wrench for measurement of welding force. |
| Net weight 57kg |
| Note – This unit does not accurately read force below 20N/mpa. Drag + welding force must equal minimum 20N/mpa for accurate welding. |
| Not recommended for welding pipe having wall thickness less than SDR 11, in diameters 63mm OD and below. |
| Please refer to Australian specifications http://www.pipa.com.au/sites/default/files/document/attachment/pop003.pdf, and http://www.pipa.com.au/sites/default/files/document/attachment/pop009.pdf if your intention is to weld SDR 17 ‘Rural’ PE pipe. |
| Please note technical specifications of Worldpoly machines may change without notice |
ELECTRIC
| 230 volt 50/60 Hz 1 phase (1.75 kw 9.0 A). |
| Requires generator minimum 2.3 KVA. |
A manually operated butt-welding machine suitable for PE and PP pipes and fittings from 40 to 160mm OD. Efficient design and construction provides an excellent low cost machine for welding both on the worksite and in the factory. The use of high quality Aluminium castings allows for lower weight without compromising strength and performance. Optional torque wrench allows welding force to be read.
WHATEVER YOUR REQUIREMENTS.
HIRE IT FROM US!
All the poly pipe fusion products and equipment you need to get the job done right, now available at competitive Hire Rates.
Available for daily, weekly or monthly hire, we have a wide range of equipment from Electrofusion Welders and Butt Fusion Machines, to Ancillary Tooling guaranteed to meet your job requirements.
In addition to our well-know support, we also offer Hire Packages and Kits such as Welder, Clamp and Scraper Kits, so you know we are your one stop-shop to get all the equipment you need to get the job done.
Simply fill in the form , detailing your job needs or reference the equipment you are after, and one of our specialists will contact you within 24hrs. You can find all our equipment in our Products Page.
© Caldertech Australia 2023. ABN 22 164 140 630. All Rights Reserved.