Pipe Fusion Equipment
Written by Caldertech
High-Density Polyethylene (HDPE) welding is a crucial process in various industries, including construction, pipeline installation, and plastic fabrication. Mastering this technique involves understanding the material, using the right tools, and applying precise methods to ensure strong, reliable welds. This guide explores essential techniques and tools for successful HDPE welding. HDPE welding involves joining HDPE plastic […]
Written by Caldertech
What is a debeader?A debeader is a tool that helps remove this extra plastic from the inside (or outside) of the pipe after the pipes have been fused together. Think of it like a scraper or a tool that shaves off the excess, so the inside of the pipe is smooth again. This is important […]
Written by Caldertech
Squeeze-off tooling is a tool used to temporarily stop the flow of gas or water in a plastic pipe without having to cut the pipe or make permanent changes. Imagine you have a garden hose with water flowing through it, and you want to stop the water quickly without turning off the faucet. One way […]
Written by Caldertech
1. Electrofusion must not be used if the operator suspects that a gaseous atmosphere is present. This must be checked using an approved gas detector prior to the weld to confirm that the gas readings remain below 20% LEL (Lower Explosive Limit). 2. If the fusion stops mid-weld, allow the fitting and pipe to cool […]
Written by Caldertech
Did You Know? Proper Pipe Preparation is Key to Successful Electrofusion Welding! When working with HDPE pipes, peeling or scraping is a crucial step to ensure a strong, reliable weld. Here’s why: Why Peeling Matters: Removes Oxidized Layer: HDPE pipes develop an oxidized layer on the surface when exposed to air. This layer must be […]
Written by Caldertech
Need Butt Fusion Tips? Download this great Good Practice Guide to Butt Fusion Jointing from Fusion Equipment Ltd, with information to enable the operator to understand: • Equipment required.• Principles of PE pipe butt fusion jointing.• Pipe and appropriate fitting markings.• Site of equipment.• Pre-jointing machine and equipment checks.• Satisfactory butt fusion joints across a […]
Written by Caldertech
Whether you’re a tradie or a civil plumbing and construction company, you will face the same questions and decisions about whether to buy or hire your equipment. There are many advantages to both options for companies and operators. However, finding the best choice for your project will depend on the nature of the job, your […]
Written by Caldertech
As part of our quality guarantee, it is exciting news to announce the certification by BSI of our Hydraulic Squeeze Tool 250, manufactured by our sister company Fusion Equipment, and in full conformity to the standard GIS PL2-7:2013 Polyethylene pipes and fittings for natural gas and suitable manufactured gas. Part 7:Squeeze-off tools and equipment. This certification […]
Written by Caldertech
In electrofusion welding, particularly for polyethylene (PE) pipes, using the correct clamps is essential to ensure the pipes are held securely in place during the welding process. The primary purpose of clamps in electrofusion welding is to prevent pipe movement and ensure proper alignment and contact between the pipe and the electrofusion fitting. Here are […]
Written by Caldertech
When buying an electrofusion welder, it’s crucial to consider several factors to ensure you get a reliable, efficient, and suitable device for your specific needs. Here are the key aspects to look for: 1. Compatibility and Capacity Pipe Size Range: Ensure the welder can handle the range of pipe diameters you typically work with.Material […]
Please confirm you want to block this member.
You will no longer be able to:
Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.
